Business
ASTM D1298 Standard Test Method for Density Relative Density or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM International
This test method covers the laboratory determination using a glass hydrometer in conjunction with a series of calculations, of the density, relative density, or API gravity of crude petroleum, petroleum products, or mixtures of petroleum and nonpetroleum products normally handled as liquids, and having a Reid vapor pressure of 101.325 kPa (14.696 psi) or less.
Online Course
Business
ASTM D130 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
ASTM International
This test method covers the determination of the corrosiveness to copper of aviation gasoline, aviation turbine fuel, automotive gasoline, cleaners (Stoddard) solvent, kerosine, diesel fuel, distillate fuel oil, lubricating oil, and natural gasoline or other hydrocarbons having a vapor pressure no greater than 124 kPa (18 psi) at 37.8 degrees C.
Online Course
Business
ASTM D1319 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM International
This test method covers the determination of hydrocarbon types over the concentration ranges from 5 to 99 volume percent aromatics, 0.3 to 55 volume percent olefins, and 1 to 95 volume percent saturates in petroleum fractions that distill below 315 degrees C. This test method may apply to concentrations outside these ranges, but the precision has not been determined. Samples containing dark-colored components that interfere in reading the chromatographic bands cannot be analyzed.
Online Course
Business
ASTM D156 Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)
ASTM International
This test method covers the determination of the color of refined oils such as undyed motor and aviation gasoline, jet propulsion fuels, naphthas and kerosine, and, in addition, petroleum waxes and pharmaceutical white oils.
Online Course
Business
ASTM D189 Standard Test Method for Conradson Carbon Residue of Petroleum Products
ASTM International
This test method covers the determination of the amount of carbon residue left after evaporation and pyrolysis of an oil, and is intended to provide some indication of relative coke-forming propensities.
Online Course
Business
ASTM D2386 Standard Test Method for Freezing Point of Aviation Fuels
ASTM International
This test method covers the determination of the temperature below which solid hydrocarbon crystals may form in aviation turbine fuels and aviation gasoline.
Online Course
Business
ASTM D2500 Standard Test Method for Cloud Point of Petroleum Products
ASTM International
This test method covers only petroleum products and biodiesel fuels that are transparent in layers 40 mm in thickness, and with a cloud point below 49°C.
Online Course
Business
ASTM D3227 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline Kerosine Aviation Turbine and Distillate Fuels (Potentiometric Method)
ASTM International
This test method covers the determination of mercaptan sulfur in gasolines, kerosines, aviation turbine fuels, and distillate fuels containing from 0.0003 to 0.01 mass percent of mercaptan sulfur.
Online Course
Business
ASTM D4294 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM International
This test method covers the determination of total sulfur in petroleum and petroleum products that are single-phase and either liquid at ambient conditions, liquefiable with moderate heat, or soluble in hydrocarbon solvents. These materials can include diesel fuel, jet fuel, kerosine, other distillate oil, naphtha, residual oil, lubricating base oil, hydraulic oil, crude oil, unleaded gasoline, gasohol, biodiesel, and similar petroleum products.
Online Course
Business
ASTM D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM International
This test method specifies a procedure for the determination of the kinematic viscosity, v, of liquid petroleum products, both transparent and opaque, by measuring the time for a volume of liquid to flow under gravity through a calibrated glass capillary viscometer. The dynamic viscosity, n, can be obtained by multiplying the kinematic viscosity, v, by the density, p, of the liquid.
Online Course
Business
ASTM D482 Standard Test Method for Ash from Petroleum Products
ASTM International
This test method covers the determination of ash in the range 0.001-0.180 mass percent, from distillate and residual fuels, gas turbine fuels, crude oils, lubricating oils, waxes, and other petroleum products, in which any ash-forming materials present are normally considered to be undesirable impurities or contaminants. The test method is limited to petroleum products which are free from added ash-forming additives, including certain phosphorus compounds.
Online Course
Business
ASTM D5444 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate
ASTM International
This test method covers a procedure for determination of the particle size distribution of fine and coarse aggregates extracted from bituminous mixtures using sieves with square openings.
Online Course
Business
ASTM D664 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM International
This test method covers procedures for the determination of acidic constituents in petroleum products, lubricants, biodiesel and blends of biodiesel.
Online Course
Business
ASTM D70 Standard Test Method for Density of Semi Solid Bituminous Materials (Pycnometer Method)
ASTM International
This test method covers the determination of the relative density and density of semi-solid bituminous materials, asphalt cements, and soft tar pitches by use of a pycnometer.
Online Course
Business
ASTM D86 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
ASTM International
This test method covers the atmospheric distillation of petroleum products using a laboratory batch distillation unit to determine quantitatively the boiling range characteristics of such products as light and middle distillates, automotive spark-ignition engine fuels with or without oxygenates, aviation gasolines, aviation turbine fuels, diesel fuels, biodiesel blends up to 20 percent, marine fuels, special petroleum spirits, naphthas, white spirits, kerosines, and Grades 1 and 2 burner fuels.
Online Course
Business
ASTM D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
ASTM International
These test methods cover the determination of the flash point of petroleum products in the temperature range from 40 to 370 degrees C by a manual Pensky-Martens closed-cup apparatus or an automated Pensky-Martens closed-cup apparatus, and the determination of the flash point of biodiesel in the temperature range of 60 to 190 degrees C by an automated Pensky-Martens closed cup apparatus.
Online Course
Business
ASTM D97 Standard Test Method for Pour Point of Petroleum Products
ASTM International
This test method covers and is intended for use on any petroleum product. The cloud point procedure formerly part of this test method now appears as Test Method D2500.
Online Course
Business
ASTM D974 Standard Test Method for Acid and Base Number by Color-Indicator Titration
ASTM International
This course covers the determination of acidic or basic constituents in petroleum products and lubricants soluble or nearly soluble in mixtures of toluene and isopropyl alcohol. It is applicable for the determination of acids or bases whose dissociation constants in water are larger than 10?9, extremely weak acids or bases whose dissociation constants are smaller than 10?9 do not interfere.
Online Course
Business
Why Buildings Matter and the Critical Role of ASTM International Standards in Delivering on Building Energy Performance Objectives
ASTM International
Seminar will address building energy efficiency and code compliance for buildings and building products. To present information on product and building performance issues for new construction or renovation, energy use and peak demand issues for utilities, as well as meaningful sustainability metrics.
Seminar
